Breakthrough in Airline Industry Thesis Example | Topics and Well Written Essays - 2000 words

Breakthrough in Airline Industry - Thesis Example Two successful companies are proposed as case study samples for the survey and extensive person-to-person interviews, namely, Southwest Airlines and American Airlines. In addition, two other profit-taking companies, Singapore Airlines and Cathay Pacific, shall serve as subjects of secondary interest as the thesis looks into their CRM practice by requesting them through e-mail or fax to fill up a questionnaire on the topic. If feasible, the proposed research shall locate any remaining office or persons that can speak for the failed Oasis Airlines, which is currently undergoing bankruptcy proceedings. Learning about the CRM techniques of both a successful and a collapsed airline is valuable to the proposed thesis since it will enable us to evaluate which process is more effective and useful. Whilst one airline after another goes out of business or on the edge of bankruptcy, a handful of airlines continue to operate profitably as if no crisis assails the industry at all. The most prominent of these successful airlines are Southwest Airlines, Cathay Pacific, Singapore Airlines, American Airlines and EasyJet. ... Southwest Airlines, for example, was recently honored by the US Department of Transportation for having the least number of complaints received from customers. It is interesting to see what management and operational strategies do these airlines employ to insulate their companies against the current economic crisis as well as the instabilities common to the industry, which can be highly instructive to both practitioners and students of management and marketing. 1.1 Main question: How do the fairly successful airlines handle their contacts with customers as compared to the customer relationship management applications used by failed airlines 1.2 Sub-questions: (1) Can adoption of CRM in the airline industry make a difference between long-term and short-term profitability (2) Which is more beneficial to an airline: online selling of plane tickets or through travel agents (3) Are loyalty schemes that reward frequent flyers part of good CRM practice that should be offered by troubled airlines (4) What tangible benefits have successful airlines derived from CRM for this to be considered a breakthrough system of management for the highly vulnerable airline industry 2. Literature Review Research for the proposed thesis shall focus on the actual results and benefits of CRM applications in airlines in light of the inherent difficulty in managing an airline and the turbulence experienced by the industry in the past few years. In effect, it will measure the impact of CRM applications on the bottom line of airlines based on the experience of Southwest Airlines and American Airlines. Studies of airline CRM in the existing literature, on the other hand, mostly discuss the rationale and mechanics of this process

The Russian Revolution Essay Example for Free

The Russian Revolution Essay The Russian Revolution was not merely a culmination of event from 1905-19-17, but was the result of political, economic and social conditions from centuries of corrupt tsarist rule.The Russian Revolution of 1917 involved the collapse of an empire under Tsar Nicholas II and the rise of Marxian socialism under Lenin and his Bolsheviks. It sparked the beginning of a new era in Russia that had effects on countries around the world.The Russian Revolution of 1917 was one of the most significant events in the 20th century. It completely changed the government and outlook on life in the very large country of Russia. The events of the revolution were a direct result of the conflict in World War I. Many problems had led to the debilitating situation in the early 20th century for explain like social, economic and political conditions led to the Russian Revolution. For the social conditions Russia needed to educate the population. Many peasants were hungry and starving caused many to die of starvation. Many peasants were unskilled and forced into labor. Also A large majority of the population was illiterate meaning didnt know how to read and write, so many were jobless and uneducated. Factory owners wanted workers who knew how to read and write and factories were looking for more skilled workers. According to Document 3 unskilled workers had dedication but were forced into factories with dangerous conditions. Also according to Document 2 the Communist government wanted to take away illiteracy which affected city workers . But then as early as 1919 a campaign was started to remove illiteracy . In 1921 school were built in factories and were offered to construct basic reading, writing and arithmetic lessons.The education of the people led to the growing popularity of several anti-Czarist groups. Another condition that affected the situation was Political Russia’s Army was extremely weak, made mainly of peasants, and the cost of war was weighing down on the citizens of Russia. In reality, Czars Nicholas II had no ability to be a ruler, and proved himself to be politically incapable of governing a country. Starvation and poor living conditions lined the streets of homeless families. Many people were unemployed, and  those who were faced terrible conditions when they were working.Czar Nicholas II was a firm believer that his power to rule was granted by Divine Right, Nicholas assumed that the Russian people were devoted to him with unquestioning loyalty. This belief rendered Nicholas unwilling to allow the progressive reforms that might have made the suffering of the Russian people die down.Dissatisfaction with Tsar Nicholas II culminated in the huge national disturbance, that followed the Bloody Sunday massacre of January 1905, in which hundreds of unarmed protesters were shot by the Tsars troops. Workers responded to the massacre with a crippling general strike. This led to the growing population of several anti-czarist groups There.were also social democrats, such as the Bolsheviks and Mensheviks. Both groups aimed to overthrow the Czar and create a socialist state, they had the support of students and workers, but the main differences were in the organization of the parties. The Bolsheviks, believed in a small, secret, disciplined party of professional revolutionists who would seize power when the time was right. They planned revolutionary cells of three or four people who would organize strikes and demonstrations in factories. Among these people was Vladimir Ulyanov, better as Lenin. He was a devoted Bolshevik who was exile to in Siberia after being arrested for his action in a Marxist group Marxism is a political ideology often known as Marxism-Leninism. It marked the beginning of the spread of communism in the 20th century. The Mensheviks, believed the party should be a mass organization which all workers could join. This mass party would grow until it eventually took power. Among these the Mensheviks was Lev Bronstein, better known as Trotsky. Trotsky was a kulak, a rich peasant..Later on, he became the Menshevik chairman. One more condition that affected the situation was economic At the same time, peasant life and culture was changing constantly. Change was facilitated by the physical movement of growing numbers of peasant villagers who migrated to and from industrial and urban environments, but also by the introduction of city culture into the village through material goods. Workers also had good reasons for dissatisfaction overcrowded housing with often disgraceful sanitary conditions, long hours at work 10-hour workday six days a week was the average and many were working 11–12 hours a day by 1916, constant risk of injury and death from very poor safety and sanitary conditions, harsh  discipline (not only rules and fines, but foremen’s fists), and poor wages. At the same time, urban industrial life was full of benefits, though these could be just as dangerous, from the point of view of social and political stability, as the hardships. Acquiring new skills gave many workers a sense of self-respect and confidence, heightening expectations and desires. Living in cities, workers encountered material goods such as they had never seen while in the village. Most important, living in cities, they were exposed to new ideas about the social and political order. The soviet state from the early 1920s through the 1930s had many problems that led to the revolution. Stalin missed much of the activity leading up to the Russian Revolution in 1917 because he was exiled to Siberia from 1913 to 1917. Upon his release in March of 1917, Stalin resumed his role as a Bolshevik leader. By the time he was reunited with Lenin, who also returned to Russia a few weeks after Stalin, Czar Nicholas II had already step down from is thrown as part of the February Russian Revolution. With the czar removed, the Provisional Government was in charge. Lenin and Stalin, however, wanted to break the Provisional Government and install a Communist one, con trolled by the Bolsheviks. Feeling that the country was ready for another revolution, Lenin and the Bolsheviks began a nearly bloodless coup on October 25, 1917. In just two days, the Bolsheviks had taken over Petrograd, the capital of Russia, and then became the leaders of the country. By 1927, Stalin had effectively eliminated all of his political rivals (and exiled Trotsky) to emerge as the head of the Communist Party of the Soviet Union. Lenin wanted a worldwide communist revolution stalin only wants to increase the power to the soviet union. Stalins willingness to use brutality to achieve political aims was well established by the time he took power; nevertheless, the Soviet Union was unprepared for the extreme violence and oppression that Stalin unleashed in 1928. This was the first year of Stalins Five Year Plan, a radical attempt to bring the Soviet Union into the industrial age. Stalin’s Five Year Plans started a farming revolution. The government took control of farms and combined them to make government owned farms called collective farms. According to Document 5 it shows how Stalins first Five Year Plan worked how the government took control over everything like electricity coal ,oil, pig iron, steel. Alson in Document 6 too it shows how the USSRs collectivization affected  agricultural production in soviet union. As in conclusion Social , Economic and Political conditions affected the Situation and it led to the Russian Revolution. Some of those conditions had a positive affects and also a negative affect.

Review of Data Duplication Methods

Review of Data Duplication Methods Mandeep Singh Abstract: -The cloud storage services are used to store intermediate and persistent data generated from various resources including servers and IoT based networks. The outcome of such developments is that the data gets duplicated and gets replicated rapidly especially when large numbers of cloud users are working in a collaborative environment to solve large scale problems in geo-distributed networks. The data gets prone to breach of privacy and high incidence of duplication of data. When the dynamics of cloud services change over period of time, the ownership and proof of identity operations also need to change and work dynamically for high degree of security. In this work we will study the concepts; methods and the schemes that can make the cloud services secure and reduce the incident of data duplication with use of cryptography mathematics and increase potential storage capacity. The purposed scheme works for deduplication of data with arithmetic key validity operations that redu ce the overhead and increase the complexity of the keys so that it is hard to break the keys. Keywords: De-duplication, Arithmetic validity, proof of ownership. INTRODUCTION Organizations that focus on providing online storage with strong emphasizes on the security of data based on double encryption [1] (256 bit AES or 448 bit), managed along with fish key algorithm and SSL encryption [2] based connections are in great demand. These organizations need to maintain large size data centers that have a temperature control mechanism, power backups are seismic bracing and other safeguards. But all these safeguards, monitoring and mechanism becomes expensive, if they do not take care of data duplication issues and problems related to data reduction. Data Deduplication [3] occurs especially when the setup is multi-users and the users are collaborating with each others work objects such as document files, video, cloud computation services and privileges etc. and volume of data grows expensively. In a distributed database management systems special care is taken to avoid duplication of data either by minimizing the number of writes for saving I/O bandwidth or de normalization. Databases use the concept of locking to avoid ownership issues, access conflicts and duplication issues. But even as disk storage capacities continue to increase and are becoming more cheaper, the demand for online storage has also increased many folds. Hence, the cloud service providers (CSP) continue to seek methods to reduce cost of DE-duplication and increase the potential capacity of the disk with better data management techniques. The data managers may use either compression or deduplication methods to achieve this business goal. In broad terms these technologies can be classified as data reduction techniques. The end customers are able to effectively store more data than the overall capacity of their disk storage system would allow. For example a customer has 20 TB storage array the customer may bet benefit of 5:1 which means theoretically 5 times the current storage can be availed. [(5*20 TB) = 100 TB]. The next section defines and discussed data reduction methods and issues of ownership to build trustful online storage services. Fig: Deduplication Process The next section defines and discussed data reduction methods and issues of ownership to build trustful online storage services. The purpose is to obtain a reducedrepresentation of a data set file that much smaller in volume yet provide same configure even, if the modified data in a collaborative environment. The reduced representation does not necessarily means a reduction in size of the data, but reduction in unwanted data or duplicates the existence of the data entities. In simple words the data reduction process would retain only one copy of the data and keep pointers to the unique copy if duplicates are found. Hence data storage is reduced. Compression [4]: It is a useful data reduction method as it helps to reduce the overall resources required to store and transmit data over network medium. However, computational resources are required for data reduction method. Such overhead can easily be offset due to the benefit it offers due to compression. However, an subject to the space time complexity trade off; for example, a video compression may require expensive investment in hardware for its compression-decompression and viewing cycle, but it may help to reduce space requirements in case there is need to achieve the video. Deduplication [3]: Deduplication is processed typically consist of steps that divide the data into data sets of smaller chunk sizes and use an algorithm to allocate each data block a unique hash code. In this, the deduplication process further find similarities between the previously stored hash codes to determine if the data block is already in the storage medium. Few methods use the concept comparing back up to the previous data chunks at bit level for removing obsolete data. Prominent works done in this area as follows: Fuse compress compress file system in user space. Files-depot Experiments on file deduplication. Compare A python-based deduplication command line tool and library. Penknife its used to DE duplicate informations in shot messages Opendedup A user space deduplication file system (SDFS) Opendedupe A deduplication based filesystem (SDFS) Ostor Data deduplication in the cloud. Opensdfs A user space deduplication file system. Liten Python based command line utility for elimination of duplicates. Commercial: 1). Symantec 2). Comm Vault. 3). Cloud Based: Asigra, Baracuda, Jungle Disk, Mozy. Before we engross further into this topic, let us understand the basic terms involved in the DE duplication process having in built securely features. Security Keys [5]: The security keys mainly consist of two types, namely first is Public Key and second is Private Key. The public keys are essentially cryptographic keys or sequences that can be obtained and used by anyone to encrypt data/messages intended for particular recipient entity and can be unlocked or deciphered with the help of a key or sequence in knowledge of recipient (Private Key). Private Key is always paired with the public key and is shared only with key generator or initiator, ensuring a high degree of security and traceability. Key Generation: It is a method of creating keys in cryptography with the help of algorithms such as a symmetric key algorithm (DES or AES) and public key algorithm (such as RSA) [6]. Currently systems such as TLS [7], SSH are using computational methods of these two. The size of the keys depends upon the memory storage available on (16, 32, 64, 128 bits) etc. Key Distribution: Before, any authentication process can happen both the parties need exchange the private and public keys. In typical public key cryptography, the key distribution is done using public server keys. The key generator or initiator keeps one key to himself/herself and uploads the other key to server. In case of SSH the algorithm used is Diffie-Hellman key [6] exchange. In this arrangement, if the client does not possess a pair of public and private key along with published certificate. It is difficult for the client to proof ownership. The Figure [1] shows the life cycle of Keys used for the sake of security. Fig 1: Life Cycle of Key Key Matching and Validation: Since, in most cases the private key is intended to reside on the server. And, the key exchange process needs to remain secure with the use of secure shell, this is a need to have a robust key matching algorithm so that no spoofing or manipulation occur in transient. Moreover, it is always recommended that a public key validation must be done before these keys are put into operation. Public key validation tests consist of arithmetic test [8] that ensure that component of candidate informs to key generation standard. Hence, a certificate authority [9] (CA) helps in choosing the trusted parties bound by their individual identities with the help of public key. This is stated in Certificate Produce Standards. Some third party validators use the concept of key agreements and others may use the concept of proof of possession mechanism. In POP mechanism [10], for the proper establishment of keys, the user interacting is required to work with CA using a natural function of the keys (either key agreement for encryption) or by using zero-proof knowledge algorithms [11] to show possession of private key. POP shows that user owns the corresponding private key, but not necessarily, that the public key is arithmetically valid. The Public key validation (PKV) methods show that public key is arithmetically valid, but not necessary that anyone who owns the corresponding key. Combination of these (POP and PKV) methods gives a greater degree of security confidence that can be useful for Deduplication operation. However, the only issues needs to be addressed is the overhead involved in public key validation. Improvements in arithmetic validity test can be done to improve the validation process, especially in concept of DE duplication area; where the message to be encrypted in data chunks and need to arithmetic validation and proof of ownership is to be done multiple times due to the collaborative nature of the data object. Most of the arithmetic tests validity are based on the generation and selection of prime numbers. It was in late 1989s many people came up with an idea of solving key distribution problem for exchanging information publicly with a use of a shared or a secret cipher without someone else being able to compute the secret value. The most widely used algorithms DiffieHellman key exchange takes advantage of prime number series. The mathematics of prime numbers (integer whole numbers) shows that the modulus of prime numbers is useful for cryptography. The Example [Table no. 1] clearly illustrates the prime number values gets the systematically bigger and bigger, is very usefu l for cryptography as it has the scrambling impact. For example: Prime Numbers in Cryptography and Deduplication: Prime numbers [13] are whole numbers integers that have either factors 1 or same factor as itself. They are helpful in choosing disjoint sets of random numbers that do not have any common factors. With use of modular arithmetic certain large computations can be done easily with reduced number of steps. It states that remainder always remain less than divider, for example, 39 modulo 8, which is calculated as 39/7 (= 4 7/8) and take the remainder. In this case, 8 divides into 39 with a remainder of 7. Thus, 39 modulo 8 = 7. Note that the remainder (when dividing by 8) is always less than 8. Table [1] give more examples and pattern due this arithmetic. 11 modulus 8=3 17 modulus 8=1 12 modulus 8=4 18 modulus 8=2 13 modulus 8=5 19 modulus 8=3 14 modulus 8=6 20 modulus 8=4 15 modulus 8=7 21 modulus 8=5 16 modulus 8=0 So onà ¢Ã¢â€š ¬Ã‚ ¦. Table 1: Example of Arithmetic of modus To do modular addition [14], two numbers are added normally, then divided by the modulus and get the remainder. Thus, (17+20) mod 7 = (37) mod 7 = 2. The next section illustrates, how these computations are employed for cryptographic key exchange with typical example of Alice, Bod and Eva as actors in a typical scenario of keys exchange for authentication. Step1: Sender (first person) and receiver (second person) agree, publicly, on a prime number X, having base number Y. Hacker (third person) may get public number X access to the public prime number. Step 2: Sender (first person) commits to a number A, as his/her secret number exponent. The sender keeps this secret. Receiver (second person), similarly, select his/her secret exponent. Then, the first person calculates Z using equation no. 1 Z = YA (mod X) à ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦.. (1) And sends Z to Receiver (second person). Likewise, Receiver becomes calculate the value C using equation no. 2 Z= YB (mod X) à ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦ (2) And sends C to Sender (first person). Note that Hacker (third person) might have both Y and C. Step 3: Now, Sender takes the values of C, and calculate using equation no. 3 CA (mod X). à ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦.. (3) Step 4: Similarly Receiver calculates using equation no. 4 ZB (mod X). à ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦.. (4) Step 5: The value they compute is same because K = YB (mod X) and sender computed CA (mod X) = (YB) A (mod X) = YBA (mod X). Secondly because Receiver used Z = YA (mod X), and computed ZB (mod X) = (YA) B (mod X) = YAB (mod X). Thus, without knowing Receivers secret exponent, B, sender was able to calculate YAB (mod X). With this value as a key, Sender and Receiver can now start working together. But Hacker may break into the code of the communication channel by computing Y, X, Z C just like Sender and Receiver. Experimental results in cryptography, show that it ultimately becomes a discrete algorithm problem and consequently Hacker fails to breaks the code. The Hacker does not have any proper way to get value. This is because the value is huge, but the question is how did sender and receiver computed such a large value, it is because of modulus arithmetic. They were working on the modulus of P and using a shortcut method called repeated squaring method. The problem of finding match to break the code for the hacker becomes a problem of discrete algorithm problem. [15] From the above mention in this paper, it can be deduced that the athematic validity part of the security algorithm computations can also be improved by reducing number of computational steps. For this purpose Vedic mathematical methods such as [17], especially where the resources (memory to store and compute) keys are constrained. Example: Base Type Example on how compute exponents using Vedic Maths If the base is taken less than 10 9^3= 9-1 / 1ÃÆ'-1 / (1ÃÆ'-9) / 1ÃÆ'-1ÃÆ'-9 = 8 /1 / -9 / 9 = 81 / -9 / 9 = 81 9 / 9 = 72 / 9 = 729 If the base is taken greater than 10 12^3= 12 + 2 / 2 ÃÆ'- 2 / + (2 ÃÆ'- 12) / 2ÃÆ'- 2 ÃÆ'- 12 = 14 / 4 / + 24 / 48 = 144 / +24 / 48 = 144 +24 / 48 = 168/ 48 = 1728 Life Cycle of Data and Deduplication: The life cycle of digital material is normally prove to change from technological and business processes throughout their lifecycle. Reliable re-use of this digital material, is only possible. If the curation, archiving and storage systems are well-defined and functioning with minimum resource to maximum returns. Hence, control to these events in the Life Cycle is Deduplication process and securely of data. Table: 1 recent works in key management applied in De duplication area S. No. Authors Problem undertaken Techniques used Goal achieved Junbeom Hur et al. [1] Build a secure key ownership schema that work dynamically with guaranteed data integrity against tag inconsistency attack. Used Re-encryption techniques that enables dynamic updates upon any ownership changes in the cloud storage. Tag consistency becomes true and key management becomes more efficient in terms of computation cost as compare to RCE (Randomized convergent encryption). However the author did not focused their work on arithmetic validity of the keys. Although the lot of work has been done on ownership of keys. Chia-Mu Yu et al. [18] Improve cloud server and mobile device efficiency in terms of its storage capabilities and of POW scheme. Used improved of flow of POW with bloom filter for managing memory without the need to access disk after storing. Reduced server side latency and user side latency. Jorge Blasco et al. [19] Improve the efficiency of resources (space, bandwidth, efficiency) and improve security during the DE duplication process. Improved the working of bloom filter implementation for its usage in POW scheme and thwart a malicious client attack for colluding with the legitimate owner of the file. Experimental resources suggest the execution time increase when size of file grows but in case of proposed scheme it helps in building a better trade off between space and bandwidth. Jin Li et al. [20] Build an improved key management schema that it more efficiency and secure when key distribution operation access. The user holds an independent master key for encrypting the convergence keys and outsourcing them to could this creates lot of overhead. This is avoided by using ramp secret sharing (RSSS) and dividing the duplication phase into small phase (first and block level DE duplication). The new key management scheme (Dekey) with help of ramp scheme reduces the overhead (encoding and decoding) better than the previous scheme. Chao Yang et al. [21] Overcome the problem of the vulnerability of client side deduplication operation, especially when the attacker trys to access on authorized file stored on the server by just using file name and its hash value. The concept spot checking in wheel the client only needs to access small functions of the original files dynamic do efficient and randomly chosen induces of the original file. The proposed scheme creates better provable ownership file operation that maintains high degree of detection power in terms of probability of finding unauthorized access to files. Xuexue Jin et al. [11] Current methods use information computed from shared file to achieve. DE duplication of encrypted. Data or convergent encryption into method is Vulnerable as it is based well known public algorithm. DE duplication encryption algorithm are combined with proof of ownership algorithm to achieve higher degree of security during the DE duplication process. The process is also argument with proxy re-encryption (PRE) and digitalize credentials checks. The author achieved anonymous DE duplication encryption along with POW test, consequently the level of protection was increased and attacks were avoided. Danny Harnik et al. [22] Improve cross user (s) interaction securely with higher degree of privacy during DE duplication. The authors have described multiple methods that include:- (a). Stop cross over user interaction. (b). Allow user to use their own private keys to encrypt. (c). Randomized algorithm. Reduced the cost of operation to secure the duplication process. Reduced leakage of information during DE duplication process. Higher degree of fortification. Jingwei Li et al. [23] The authors have worked on the problem of integrity auditing and security of DE duplication. The authors have proposed and implemented two methods via Sec Cloud and Sec Cloud+, both systems improve auditing the maintain ace with help of map reduce architecture. The Implementation provided performance of periodic integrity check and verification without the local copy of data files. Better degree of proof of ownership process integrated with auditing. Kun He et al. [24] Reduce complications due to structure diversity and private tag generation. Find better alternative to homomorphic authenticated tree. (HAT) Use random oracle model to avoid occurrence of breach and constructs to do unlimited number of verifications and update operations. DeyPoS which means DE duplicable dynamic proof of storage. The theoretical and experimental results show that the algorithm (DeyPoS) implementation is highly efficient in conditions where the file size grows exponentially and large number of blocks are there. Jin Li et al. [25] The provide better protected data, and reduce duplication copies in storage with help of encryption and alternate Deduplication method. Use hybrid cloud architecture for higher degree of security (taken based) , the token are used to maintain storage that does not have Deduplication and it is more secure due to its dynamic behavior. The results claimed in the paper shows that the implemented algorithm gives minimal overhead compared to the normal operations. Zheng Yan et al. [26] Reduce the complexity of key management step during data duplication process But implement less complex encryption with same or better level of security. This is done with the help of Attribute Based Encryption algorithm. Reduce complexity overhead and execution time when file size grows as compared to preview work. Summary of Key Challenges Found The degree of issues related to implementation of Crypto Algorithms in terms of mathematics is not that difficult as compared to embracing and applying to current technological scenarios. Decentralized Anonymous Credentials validity and arithmetic validity is need to the hour and human sensitivity to remain safe is critical. In certain cases, the need to eliminate a trusted credential issuers can help to reduce the overhead without compromising the security level whole running deduplication process. Many algorithms for exponentiation do not provide defense against side-channel attacks, when deduplication process is run over network. An attacker observing the sequence of squaring and multiplications can (partially) recover the exponent involved in the computation. Many methods compute the secret key based on Recursive method, which have more overhead as compared methods that are vectorized. Some of the vectorized implementations of such algorithms can be improved by reducing the number of steps with one line computational methods, especially when the powers of exponent are smaller than 8. There is a scope of improvement in reducing computational overhead in methods of computations of arithmetic validity methods by using methods such as Nikhilam Sutra, Karatsuba. CONCLUSION In this paper, sections have been dedicated to the discussion on the values concepts that need to be understood to overcome the challenges in De-duplication algorithms implementations. It was found that at each level of duplication process (file and block) there is a needs for keys to be arithmetically valid and there ownership also need proved for proper working of a secure duplication system. The process becomes prone to attacks, when the process is applied in geo-distributed storage architecture. The complexity for cheating ownership verification is at least difficult as performing strong collision attack of the hash function due to these mathematical functions. Finding the discrete algorithm of a random elliptic curve element with respect to a publicly known base point is infeasible this is (ECDLP). The security of the elliptic curve cryptography depends on the ability to the compute a point multiplication and the mobility to compute the multiple given the original and product po ints. The size of the elliptic curve determines the difficulty of the problem. FUTURE SCOPE As discussed, in the section mathematical methods such as Nikhilam Sutra, Karatsuba Algorithm [27] may be used for doing computations related to arithmetic validity of the keys produced for security purpose as it involves easier steps and reduce the number of bits required for doing multiplication operations etc. Other than this, the future research work to apply to security network need of sensors that have low memory and computational power to run expensive cryptography operations such public key validation and key exchange thereafter. [1] J. Hur, D. Koo, Y. Shin and K. Kang, Secure data deduplication with dynamic ownership management in cloud storage, IEEE Transactions on Knowledge and Data Engineering, vol. 28, pp. 31133125, 2016. A. Kumar and A. Kumar, A palmprint-based cryptosystem using double encryption, in SPIE Defense and Security Symposium, 2008, pp. 69440D69440D. M. Portolani, M. Arregoces, D. W. Chang, N. A. Bagepalli and S. Testa, System for SSL re-encryption after load balance, 2010. W. Xia, H. Jiang, D. Feng, F. Douglis, P. Shialane, Y. Hua, M. Fu, Y. Zhang and Y. Zhou, A comprehensive study of the past, present, and future of data deduplication, Proceedings of the IEEE, vol. 104, pp. 1681-1710, 2016. J. Ziv and A. Lempel, A universal algorithm for sequential data compression, IEEE Transactions on information theory, vol. 23, pp. 337343, 1977. P. Kumar, M.-L. Liu, R. Vijayshankar and P. Martin, Systems, methods, and computer program products for supporting multiple contactless applications using different security keys, 2011. S. Gupta, A. Goyal and B. Bhushan, Information hiding using least significant bit steganography and cryptography, International Journal of Modern Education and Computer Science, vol. 4, p. 27, 2012. K. V. K. and A. R. K. P. , Taxonomy of SSL/TLS Attacks, International Journal of Computer Network and Information Security, vol. 8, p. 15, 2016. J. M. Sundet, D. G. Barlaug and T. M. Torjussen, The end of the Flynn effect?: A study of secular trends in mean intelligence test scores of Norwegian conscripts during half a century, Intelligence, vol. 32, pp. 349-362, 2004. W. Lawrence and S. Sankaranarayanan, Application of Biometric security in agent based hotel booking system-android environment, International Journal of Information Engineering and Electronic Business, vol. 4, p. 64, 2012. N. Asokan, V. Niemi and P. Laitinen, On the usefulness of proof-of-possession, in Proceedings of the 2nd Annual PKI Research Workshop, 2003, pp. 122127. X. Jin, L. Wei, M. Yu, N. Yu and J. Sun, Anonymous deduplication of encrypted data with proof of ownership in cloud storage, in Communications in China (ICCC), 2013 IEEE/CIC International Conference on, 2013, pp. 224229. D. Whitfield and M. E. Hellman, New directions in cryptography, IEEE transactions on Information Theory, vol. 22, pp. 644654, 1976. H. Riesel, Prime numbers and computer methods for factorization, vol. 126, Springer Science Business Media, 2012. R. A. Patel, M. Benaissa, N. Powell and S. Boussakta, Novel power-delay-area-efficient approach to generic modular addition, IEEE Transactions on Circuits and Systems I: Regular Papers, vol. 54, pp. 12791292, 2007. Repeated Squaring, Wednesday March 2017. [Online]. Available: http://www.algorithmist.com/index.php/Repeated_Squaring. [Accessed Wednesday March 2017]. Table of costs of operations in elliptic curves, Wednesday March 2017. [Online]. Available: https://en.wikipedia.org/wiki/Table_of_costs_of_operations_in_elliptic_curves. [Accessed Wednesday March 2017]. Calculating Powers Near a Base Number, Wednesday March 2017. [Online]. Available: http://www.vedicmaths.com/18-calculating-powers-near-a-base-number. [Accessed Wednesday March 2017]. C.-M. Yu, C.-Y. Chen and H.-C. Chao, Proof of ownership in deduplicated cloud storage with mobile device efficiency, IEEE Network, vol. 29, pp. 5155, 2015. J. Blasco, R. D. Pietro, A. Orfila and A. Sorniotti, A tunable proof of ownership scheme for deduplication using bloom filters, in Communications and Network Security (CNS), 2014 IEEE Conference on, 2014, pp. 481489. J. Li, X. Chen, M. Li, J. Li, P. P. Lee and W. Lou, Secure deduplication with efficient and reliable convergent key management, IEEE transactions on parallel and distributed systems, vol. 25, pp. 16151625, 2014. C. Yang, J. Ren and J. Ma, Provable ownership of files in deduplication cloud storage, Security and Communication Networks, vol. 8, pp. 24572468, 2015. D. Harnik, B. Pinkas and A. Shulman-Peleg, Side channels in cloud services: Deduplication in cloud storage, IEEE Security Privacy, vol. 8, pp. 4047, 2010. J. Li, J. Li, D. Xie and Z. Cai, Secure auditing and deduplicating data in cloud, IEEE Transactions on Computers, vol. 65, pp. 23862396, 2016. K. He, J. Chen, R. Du, Q. Wu, G. Xue and X. Zhang, Deypos: deduplicatable dynamic proof of storage for multi-user environments, IEEE Transactions on Computers, vol. 65, pp. 36313645, 2016. J. Li, Y. K. Li, X. Chen, P. P. Lee and W. Lou, A hybrid cloud approach for secure authorized deduplication, IEEE Transactions on Parallel and Distributed Systems, vol. 26, pp. 12061216, 2015. Z. Yan, M. Wang, Y. Li and A. V. Vasilakos, Encrypted data management with deduplication in cloud computing, IEEE Cloud Computing, vol. 3, pp. 2835, 2016. S. P. Dwivedi, An efficient multiplication algorithm using Nikhilam method, 2013.

Percussion :: essays research papers

Drums are among the oldest musical instruments. The best known of percussion instruments, they are found throughout the world and in a great variety of shapes and sizes. A drum normally consists of a skin or other membrane, called a head, which is stretched over an enclosed space or over one or both ends of a hollow vessel. Exceptions include the African slit drum, made from a hollowed-out tree trunk, and the Caribbean steel drum, made from a metal barrel. Drums are usually played by the hands or by one or two sticks. In some non-Western cultures drums have a symbolic function and are often used in religious ceremonies. They are sometimes used in sending signals. The talking drums of Africa can imitate the inflections and pitch variations of a spoken language and are used for communicating over great distances. Many drums used in Western societies are of African, Arabic, or Turkish origin. The kettledrum was introduced into Europe during the Crusades. The European tabor, derived from an African instrument and sometimes called a tambour, was a small drum played with the right hand, while the left hand fingered a 3-hole flute. Across its center, the tabor often held a snare, which produced a strong vibration and sustained the sound between beats. The modern symphony orchestra employs a variety of drums. Kettledrums are the most common; the bass drum, tenor drum, and snare drum, or side drum, are also sometimes used, along with tambourines and bongo drums on occasion. Among these, only the kettledrums produce sounds of definite pitch, which is adjustable. The tenor drum is a large deep drum with two heads that is played with wooden sticks. The larger bass drum, also with two heads, stands upright on its side and is struck with felt-padded sticks. Bongo drums are small single-headed drums struck with the hands and usually played in sets of two or three.

Extradition and Deportation Views of Bosnia and Herzegovina

Bosnia-Herzegovina, formally known as Yugoslavia, has been addressing many pressing issues; however, extradition and deportation has been gaining large amounts of attention from Bosnia-Herzegovina’s government. Bosnia-Herzegovina’s government consists of a tripartite presidency which is divided mainly between Croatian, Serb, and Bosnian political parties. During World War II, the Kingdom of Yugoslavia resisted the Axis powers and were overrun. The attacking axis forces: Germany, Italy, Hungary, Bulgaria, and related regimes, Croatia and Serbia partitioned off the land. Soon after the partitioning, a civil war sprang up between the Yugoslav Partisans and the royalist Chetnik Movement. Not only did this war take place, but there was also genocide committed against the local Serbs, Jews and Roma while Chetniks began to chase the Bosniak and Croat population to perform an ethnic cleansing. With much support given by the U. S. S. R and the United States of America, the Yugoslav Partisans gained more and more power over the opposing forces. Italy and all of the other commanding countries gave up their hold on the partioned land to Germany. After the city of Berlin was captured by allied forces, Germany surrendered and the once axis controlled countries were released to the allied forces. The Federal People’s Republic of Yugoslavia assumed control after World War II. â€Å"This, what you are doing, is not good. This is the path that you want to take Bosnia and Herzegovina on, the same highway of hell and death that Slovenia and Croatia went on. Don't think that you won't take Bosnia and Herzegovina into hell, and the Muslim people maybe into extinction. Because the Muslim people cannot defend themselves if there is war here. Radovan Karadzic, leader of the Serb Democratic Party, said this after hearing talks of Bosnia-Herzegovina separating and gaining its’ independence from Yugoslavia. From 1991-1992, ethnic lines were being honed in for the country of Bosnia-Herzegovina. Bosniak factions had high tension between them and the two smaller factions, Serbs and Croats. This situation caused the parliament of Bosnia-Herzegovina to become fragmented and worthless. Croatia and Yugoslavia signed an armistice while being supervised by the United Nations. The Serb and Croat powers continued to negotiate over the partitioning of Bosnia-Herzegovina. While talks to keep Bosnia a part of Yugoslavia or totally succeeding continued, no agreement was reached. When the referendum had taken place to decide Bosnia-Herzegovina’s independence, an estimated 64-67% to 98% of the votes were for independence. Shortly after Bosnia-Herzegovina gained its’ independence the Bosnian War began. Post the 1992-1995 Bosnian War, there were many Islamic fighters left in Bosnia-Herzegovina which sided with Bosnians during the war. After nearly 15 years of trouble from these old allies, a harsh policy was unanimously accepted by both the Bosniaks, Bosnian Muslim politicians, and the population of Bosnia-Herzegovina. The population of Islamic fighters have become notorious for the fact that much crime and influence of the young Muslim people. A movement known as the Wahhabi movement, run by a fundamentalist group of Islam prevalent in Saudi Arabia, is continuing to grow more and more from help by these Islamic fighters. The Bosnian Islamic Community banned the Wahhabi movement in 1993 which took place during the war when moderate Muslims were being recruited by foreign fighters for their cause. Since the U. S. – led invasions of Iraq and Afghanistan, Bosnia has seen a wide spread popularity in the Wahhabi movement. The Bosnian Islamic Community has done nothing since the ban in 1993; although, when the Wahhabis began attempting to take control of the Islamic Community’s administrative units and Mosques, the Muslim leaders were made to react. Mustafa Ceric, the grand mufti of Bosnia, began to take a message on a journey to many capitals of the world. This message entailed that the main leaders and financiers of the Bosnian Wahhabi movement were housed in Western Europe, mainly Austria. Ceric decried that action be taken by world leaders to insure that the radical Islamic groups did not populate Bosnia. This matter has been put off for some time because any attempt against this movement may sacrifice votes for politicians from the Bosniak nationalist vote. In 2006, pressure was put on the Bosnian government in which a commission was formed to review how nearly 1,500 people gained Bosnian citizenship, almost all fighters from different Muslim countries. Deportations were ordered for commencement shortly after. â€Å"Anyone should see that you sell this country piece by piece, Muslim by Muslim; you betray everything that can be betrayed †¦And be aware that Allah has the power and that you will face Him and answer for the betrayal of Islam and Muslims. † After the deportations were nearly in full-swing, a man only identified as Hattab27 said the aforementioned quote in a posted threat on you tube against Sulejman Tihic, Haris Silajdzic, and Grand Mufti. This threat entailed that if extradition and deportation were made against these brothers of the country, that a video would be released to destroy the three presidents politically. Due to the possibility of ill treatment of the deportees in their home country they could not be deported. Only two people were deported to their home countries, both last year. Bosnia-Herzegovina feels that strict deportation and extradition laws should be put in effect immediately. These laws would call for the immediate extradition of a person who has committed or who has been associated with a crime. If the said person cannot be extradited for being associated with a crime, then immediate deportation should take place. These crimes would be interpreted by the International Criminal Courts, if this court system cannot perform these duties for what ever reason then a new sub-committee should be erected to act upon these hearings. This court would be United Nations funded and any country that wishes to devote money to this cause is welcome. Although crimes vary from country to country, there should be a summit and amendment created. The amendment would compile a list of laws and regulations for extradition and deportation and the summits will be used to educate countries about the aforementioned amendment. If a country wishes to abide by the amendment then the laws and regulations will take effect immediately.

Classical Approaches to Management Essay

Since the Industrial Revolution began over two hundred years ago, management practices have had to develop and become more clearly defined. The increasing mechanisation and automation that occurred changed how goods and services were produced dramatically. New theories and disciplines emerged at the beginning of the twentieth century as a response to these challenges facing management in a more industrialised age. These new ideas, known as The Classical Approaches to management became the essential building blocks of systems and techniques which help modern day managers effectively plan, organise and control their organisations in the most efficient manner possible. One of the first theories we will look at is was what is known as Scientific Management and was developed chiefly by Frederick Taylor (1856-1917). Taylor came from an engineering background and he highlighted the importance of finding the single best way to perform a particular task. He noted that by analysing every basic movement involved and timing each action in various different ways, you would soon find the quickest and easiest method as a result. As R.C.Appelby (1994) has argued; Taylor â€Å"codified and clearly stated practices which had been developing in many well-run factories†. This â€Å"Time study† approach was very important in helping manufacturing lines improve their productivity by cutting out inefficient, outdated methods of production. Currently, manufacturing industries incorporate methods engineering systems which developed from Taylors time study work to ensure the most efficient production process is in place. Total Quality Management is a modern management practice that relies on continually improving a company’s product or service. A Key factor in this is having a production process that works efficiently and reliably. Taylor also developed the â€Å"Exception Principle† which was to be used as a quality control measure on performance. This method works by detailing precisely the standard of performance to be achieved. The performance of all staff is monitored regularly. Any ineffective staff members that do not meet the standard set are taken note of, and adjustments can then be made to improve the quality of their work. The exception principle also works by identifying any employee who is greatly outperforming the standard set. This tracking of performance results also forms part of the Total Quality Management concept and Taylors work in this area can be seen as being significant in its development. Another key aspect of Taylor’s teachings,  which is still widely used in human resources departments today, was the scientific selection of staff. He asserted that employees should be recruited scientifically based on how their own education, skills and abilities matched the requirements of the job. Once the correct candidate had been hired, they should be given training to help them to perform their tasks to the highest standard possible. He recommended that any increased productivity from an employee should be rewarded financially too, thus incentivising the employee to work harder. These managerial practices are used in nearly all organisations where it has been recognised that an organisations workforce are its most important resource. The training and constant up skilling of the workforce is necessary to keep up with advances in technology and to give a company a competitive edge. Henri Fayol (1841-1925) also developed some theories on the importance of maintaining good relations between staff and management. In his work on what is known as Administrative management, Fayol developed 14 principles of management, one of whic h was â€Å"the stability of tenure â€Å". He recognised the importance of a low staff turnover to an organisations overall effectiveness. Modern management practice generally follows this principle today but also recognises the need to bring in fresh ideas and approaches from new staff to keep the right balance of experienced workers and enthusiastic new people. Another of Fayol s principles which is greatly in evidence today is that of â€Å"initiative†. He believed that employees should be encouraged to put forward their own ideas and be free to execute their tasks in ways they see best fit. This fosters an entrepreneurial environment in the workplace, where employees feel that their ideas are worthy and could form part of a new business plan. Modern IT companies like Google are using this classical approach which has greatly improved innovation and productivity from their employees which has resulted in huge success for the company. Interestingly, Google achieved number 4 on the prestigious Fortune 100 Best Compani es To Work For in 2011. H.L. Gantt(1861-1919) was a colleague of Taylor had some similar approaches. He agreed that management were obliged to provide proper training to its staff and that clearly defined tasks and goals would incentivise employees to perform well. Gantt developed charts for measuring the performance of various projects. These are known as Gantt Charts and are still used today by managers. It gives a quick overview as to how a project  is progressing in relation to its agreed timescale and general targets. A P.E.R.T analysis is another project control method which developed from Gantts bar chart. This Project Evaluation Review Technique works in a similar way to a bar chart, but it offers three possible outcomes of how each task will take in a given project, so as to be prepared for delays in the project or quicker than expected results. This method gives the manager more information to enable him to prepare for all eventualities. Human Resource management has developed into one of the more important areas of management practice. Employees are now regarded as an organisations key asset. R.C.Appleby has said managers must â€Å"know why employees act in the manner that they do†. This is necessary to know what motivates people and what changes could improve performance among a workforce. The Hawthorne Experiments that were conducted by Elton Mayo(1880-1949) and published in 1941 showed the results of phsychological experiments on workers at the Western Electric Company. The aim of the study was to establish the impact of different conditions of work on employee productivity. A group of workers were subjected to various working environment changes such as breaks, hours and managerial leadership.

What it Takes to be a Working Mother essays

What it Takes to be a Working Mother essays I would be confident to say that everyone knows a working mother or two personally. Working mothers are quite the norm and touch every aspect of our modern day society. I am one of the many working mothers in the full time work force today. Personally, I would laugh at the term normal when used in the same sentence as mother. At times my life and is quite the opposite of what others would consider to be normal. I have a full time job and a full time family. I can say that life can be hectic, challenging and rewarding all in a single day at any given time. Each day is filled with the challenge of holding down a full time career and the grace of being a loving mother of challenging children. In the end, the rewards are endless and my goal is clearly to be the best at all I do in my career and for my family. I can personally say that having a full time career and being a single mother is draining for a lack of a better term. I raised my son Alex as a single mother since he was 7 years old. During that time I worked full time as an Escrow Officer in the real estate industry and attended a career college part time. My day started at 5 am with making lunches, checking homework and getting my son off to school. If there was any time left I then felt privileged to enjoy a cup of coffee or do my own hair before rushing out the door. My morning challenge began by taking my son to school, fighting traffic and trying to make a goal of getting it to work on time. My day then continued with the usual rat race of phones, clients and time crunches to the very end. During the day I had to also find time to run down the daily list of personal mental chores in my head. Is my son having a good day and are his grades doing well? Are my finances in order? Do we have milk at home? These were just a few of the normal laundry list of things dancing around in my head daily. I also felt that I wasnt just working a job, but I was working on a career to ...

Free Essays on Learners With Exceptionalities

Learners with exceptionalities are students who have special educational needs in relation to societal or school norms. An inability to perform appropriate academic tasks for any reason inherent in the learner makes that learner exceptional. (Slavin 1) About ten percent of students in the United States receive special education and there are many different types of learners with exceptionalities, including learning disabilities, Attention Deficit Hyperactivity Disorder, mental retardation and gifted students. A handicap is defined as a condition or barrier imposed by the environment or the self and a disability is a functional limitation that interferes with a person?s mental, physical or sensory abilities. (Slavin 1) A learning disability is a neurological disorder that affects the brain?s ability to receive, process, store and respond to information. The term learning disability is used to describe the difficulty a person of at least average intelligence has in acquiring basic academic skills. (LD 1) Learning disorders can affect a person?s ability in the areas of listening, speaking, reading, writing, and mathematics. Other features of a learning disorder are: a distinct gap between the level of achievement that is expected and what is actually being achieved, difficulties that can become apparent in different ways with different people, difficulties that manifest themselves differently throughout development, and difficulties with socio-emotional skills and behavior. (LD 1) Though experts aren?t exactly sure what causes learning disabilities, they may be caused by heredity, problems during pregnancy and birth, or incidents after birth. Often learning disabilities run in the family, so it is not uncommon to find that people with learning disabilities have a parent with the same problem. Illness or injury before birth may also attribute to learning disabilities. Drug and alcohol use during pregnancy, low birth weight, lack of oxyge... Free Essays on Learners With Exceptionalities Free Essays on Learners With Exceptionalities Learners with exceptionalities are students who have special educational needs in relation to societal or school norms. An inability to perform appropriate academic tasks for any reason inherent in the learner makes that learner exceptional. (Slavin 1) About ten percent of students in the United States receive special education and there are many different types of learners with exceptionalities, including learning disabilities, Attention Deficit Hyperactivity Disorder, mental retardation and gifted students. A handicap is defined as a condition or barrier imposed by the environment or the self and a disability is a functional limitation that interferes with a person?s mental, physical or sensory abilities. (Slavin 1) A learning disability is a neurological disorder that affects the brain?s ability to receive, process, store and respond to information. The term learning disability is used to describe the difficulty a person of at least average intelligence has in acquiring basic academic skills. (LD 1) Learning disorders can affect a person?s ability in the areas of listening, speaking, reading, writing, and mathematics. Other features of a learning disorder are: a distinct gap between the level of achievement that is expected and what is actually being achieved, difficulties that can become apparent in different ways with different people, difficulties that manifest themselves differently throughout development, and difficulties with socio-emotional skills and behavior. (LD 1) Though experts aren?t exactly sure what causes learning disabilities, they may be caused by heredity, problems during pregnancy and birth, or incidents after birth. Often learning disabilities run in the family, so it is not uncommon to find that people with learning disabilities have a parent with the same problem. Illness or injury before birth may also attribute to learning disabilities. Drug and alcohol use during pregnancy, low birth weight, lack of oxyge...

T205_TMA02 Essay Example | Topics and Well Written Essays - 1250 words

T205_TMA02 - Essay Example And whoever opposes this idea is seen as going through a regression. And even though it has been known that white students don’t necessarily outperform black students while writing the same exam, but the proponents of white supremacy still hold on to their claim to feel superior. On other hand, self-fulfilling prophecy points out how an individual could achieve his/her self purposes while taken into consideration to attitude of the others. Self fulfilling can be better understood through the Pygmalion Effect described below in the diagram (Merton, 1968): 2. The Concepts of Power Visible and Invisible: The concept of visible and invisible power in an organization has been discussed on several occasions. It is interesting to notice an organization works like a system with a structure fashion out to show those in the positions of power. For instance, everyone understands that a company’s president or managing director wields some visible executive power within that organization: they could order the production of a certain product or fire an wayward employee. However, the question about what or who holds invisible power in an organization has been asked on several occasions. Research on organizational management has demonstrated that one of the invisible power-holders in an organization is the culture of the organization. The culture in an organization demands that every employees of the organization conforms to the rules and regulations laid down for their activities (Lockett & Spear, 1980). Another source of invisible power in an organization is the financial capability of the organization. This invisible power of money compels the organization to dream and project its goals within the limits of its financial capability. 4. Peter Senge (1990) says we tend to blame outside circumstances for our problems. Systems thinking says

Analysis of the Show 24 Essay Example | Topics and Well Written Essays - 500 words

Analysis of the Show 24 - Essay Example The show's uniqueness stems from the character relationships, the script, dialogue and attention to detail. The themes are handled in such a manner that the viewer is compelled to watch every twist and turn whether the shows are about kidnappings, bomb threats, personal vendettas, assassinations, or terrorist attacks. This show is best described as the most innovative, ground-breaking television show of the past 50 years. The reason for this is the fact that it uses split screen cameras, and a real-time format to create the elements of a quality made show previously unseen in other TV shows. As the hero is put through his paces, viewers learn to care about him as more of his life and his past is revealed. Playing Jack Bauer, Kiefer Sutherland is perfect for the role, displaying professionalism as the agent as well as showing the more human side of the character. The show also follows Jack's colleagues at the Counter Terrorist Unit in Los Angeles, as well as the actions of the terrorists and particularly an important political figure such as a Senator or President played by Dennis Haysbert whose acting, is superb. The support team of the show, among others, played Carols Bernard as Tony Almeida and Elisha Cuthbert as Kim Bauer, also play a major part in each episode.  Ã‚  

Accomplishing Life Essay Example | Topics and Well Written Essays - 1250 words

Accomplishing Life - Essay Example Most of the time all we had was each other and that is why I surprised my family when I told them that I was going to join the army. My brothers and I did not have any money to go to college when we graduated, plus I didn’t want to go to college right away. I graduated in 2005 and a year later I joined the United States Army. At the time I didn’t feel like I had accomplished anything so far even though i did ok in school. I played sports and was part of school activities but still had certain goals I wanted to reach and I knew I had to start somewhere. I wanted to get away from home and see what was out in the real world for me. Army was the way to go, and then maybe I could start accomplishing my life goals. The journey for my army accomplishment started in June 2006 when i was sent off to Fort Jackson, SC for basic training. It was 9 weeks of physical and mental training and a lot of people telling you what to do all the time. There were four platoons that consisted of 50-60 people. The four platoons made one company. I was in fourth platoon, which was one of the greatest platoons you wanted to be in. I started meeting a lot of great people and did a lot of team building. We ran miles and miles; ruck marched through woods and sand, which was hard when you carried 30lbs on your back- holding a weapon. We learned about many different weapons and how to shoot them.

Aviation Careers Essay Example | Topics and Well Written Essays - 250 words

Aviation Careers - Essay Example Employers for graduates of aviation courses are airlines, airports, national and international unions, companies in the logistics and supplier industry and government. A career in aviation offers excitement, the opportunity for regular travel, and the chance to constantly learn new skills. However, the preparation for this fast-paced industry is an extensive process. A career in aviation means you will meet and work with a wide variety of people. One has to be able to perform well under pressure and must be able to understand the complex technical concepts of aviation. Technology is an important and crucial aspect in any aviation career. Experts in the area of computers, electronics, instrumentations, inspections, and investigations are in great demand in the aviation industry. Several opportunities are also available in research and development because of the need to always determine safer and more efficient ways and techniques to upgrade the industry. The search for new products an d technology is simply non-stop. If one wishes to work with an airline, there are various entry level positions which will cover a wide variety of duties and responsibilities. One may opt to be a flight attendant which will require extensive customer contact. It is important that one possesses strong interpersonal and communication skills.

Discuss the theme of Aunt Granny Lith using the topic of Lilith Research Paper

Discuss the theme of Aunt Granny Lith using the topic of Lilith - Research Paper Example The story then takes us back more than 20 tears when Beth and Casey married. Beth was the third wife of Casey, and the first two having died under mysterious circumstances. Their deaths are hereafter attributed to the work of an old granny, Lith who Casey supposedly proposed to long before he married the first wife. Although in a rare joke, the granny is likely to have taken the proposal seriously and just like the Lilith in the mythical biblical story of Adam, the old woman was ready to ensure that he got married to the man who proposed and that no other woman was to come close (Schwartz, 93). The theme, Lilith augurs well with the story, â€Å"Aunt Granny Lith† in a number of ways. First, the first two wives of Casey died out of the jealous of a woman who Casey proposed to. Their deaths are a manifestation that the old ready, as in the myth was not ready to share a husband with another woman. It is out of this fear that Casey even carry a gun and a knife with him. Having revealed the story to Beth, Beth’s mother Nomey uses her knowledge on the old lady and advises the young couple on low to avoid the wrath. The bravery of Beth, as that of Eve in the Lilith myth is seen when she follows her mother’s advice, and even convinces Casey to do the same and at the end the two get rid of the danger and the fear. The victory of human over the forces of evil is also seen in the symbolism of Lil. Besides the name being significantly symbolic of the same force that was with the old woman and Lilith in the myth. After Beth’s marriage, the woman appears to Beth â€Å"†¦.saw someone scurry into the woods†¦. trailed the person to the head of the hollow† (Offutt, 136). The fight that results over Casey is an indication of the evil that has to be overcome by Beth and her husband to live safely. However, in this case, Beth effectively protects her marriage and does not need any help from her

Evaluation of TV show or movie Essay Example | Topics and Well Written Essays - 1000 words

Evaluation of TV show or movie - Essay Example But as the new episodes are aired, the personalities which we have assigned to each characters seems to be invalid when different mishaps at the firm arisesand the characters are on an emotional roller coaster ride, revealing their true selves to the audience. Although on the surface, the serial outlines the show having uncaring and unemotional characters but involvement of one young and sympathetic associate attorney have them questioning their ways, bringing out their uncertainty and feelings and evoking their allegiance which makes all the ladies in the audience gush out â€Å"Oh my God, Harvey is such a darling!†. Hence, Suits depicts faithfulness, trust and loyalty as a medium to achieve a feat and not only competence. Played by a skilled actor Gabriel Macht, Harvey Specter is a self-centered and unemotional man whose main concern is winning for which he can do anything, but as we approach season two we see that to keep his associate, Mike Ross - who does not clear the eligibility of the job, in the firm he goes to great length by threatening to leave his job if the kid got fired, which illustrated the care he had for his associate. Moreover, in the mid of the same seasonin a critical situation where Harvey is to be disbarred on the accusation by his enemy for burying evidences, he teams up with the firm’s former managing director Daniel Hardman (who again gets involved in the firm after his wife died), whom he regard as an enemy, rather than voting for Jessica’s decision of going to a trial because that would jeopardize everyone in the firm, showing his loyalty and commitment to the organization. Similarly, in the same manner it is revealed in the upcoming season that being in compa ny of his associate; Harvey is starting to value those things, which initially were nuisance to him. Moving to the female leading character, Jessica Pearson is a hard woman who will go to any length to keep her surname on the wall of the firm

Aviation Careers Essay Example | Topics and Well Written Essays - 250 words

Aviation Careers - Essay Example Employers for graduates of aviation courses are airlines, airports, national and international unions, companies in the logistics and supplier industry and government. A career in aviation offers excitement, the opportunity for regular travel, and the chance to constantly learn new skills. However, the preparation for this fast-paced industry is an extensive process. A career in aviation means you will meet and work with a wide variety of people. One has to be able to perform well under pressure and must be able to understand the complex technical concepts of aviation. Technology is an important and crucial aspect in any aviation career. Experts in the area of computers, electronics, instrumentations, inspections, and investigations are in great demand in the aviation industry. Several opportunities are also available in research and development because of the need to always determine safer and more efficient ways and techniques to upgrade the industry. The search for new products an d technology is simply non-stop. If one wishes to work with an airline, there are various entry level positions which will cover a wide variety of duties and responsibilities. One may opt to be a flight attendant which will require extensive customer contact. It is important that one possesses strong interpersonal and communication skills.

Evaluation of TV show or movie Essay Example | Topics and Well Written Essays - 1000 words

Evaluation of TV show or movie - Essay Example But as the new episodes are aired, the personalities which we have assigned to each characters seems to be invalid when different mishaps at the firm arisesand the characters are on an emotional roller coaster ride, revealing their true selves to the audience. Although on the surface, the serial outlines the show having uncaring and unemotional characters but involvement of one young and sympathetic associate attorney have them questioning their ways, bringing out their uncertainty and feelings and evoking their allegiance which makes all the ladies in the audience gush out â€Å"Oh my God, Harvey is such a darling!†. Hence, Suits depicts faithfulness, trust and loyalty as a medium to achieve a feat and not only competence. Played by a skilled actor Gabriel Macht, Harvey Specter is a self-centered and unemotional man whose main concern is winning for which he can do anything, but as we approach season two we see that to keep his associate, Mike Ross - who does not clear the eligibility of the job, in the firm he goes to great length by threatening to leave his job if the kid got fired, which illustrated the care he had for his associate. Moreover, in the mid of the same seasonin a critical situation where Harvey is to be disbarred on the accusation by his enemy for burying evidences, he teams up with the firm’s former managing director Daniel Hardman (who again gets involved in the firm after his wife died), whom he regard as an enemy, rather than voting for Jessica’s decision of going to a trial because that would jeopardize everyone in the firm, showing his loyalty and commitment to the organization. Similarly, in the same manner it is revealed in the upcoming season that being in compa ny of his associate; Harvey is starting to value those things, which initially were nuisance to him. Moving to the female leading character, Jessica Pearson is a hard woman who will go to any length to keep her surname on the wall of the firm

The Automobile Sector Essay Example for Free

The Automobile Sector Essay The automobiles sector is divided into four segments – two-wheelers (mopeds, scooters, motorcycles, electric two-wheelers), passenger vehicles (passenger cars, utility vehicles, multi-purpose vehicles), commercial vehicles (light and medium-heavy vehicles), and three wheelers (passenger carriers and good carriers). The industry is one of the key drivers of economic growth of the nation. Since the delicensing of the sector in 1991 and the subsequent opening up of 100 percent FDI through automatic route, Indian automobile sector has come a long way. Today, almost every global auto major has set up facilities in the country. The world standings for the Indian automobile sector, as per the Confederation of Indian Industry, are as follows: * Largest three-wheeler market * Second largest two-wheeler market * Tenth largest passenger car market * Fourth largest tractor market * Fifth largest commercial vehicle market * Fifth largest bus and truck segment The auto sector reported a robust growth rate of 26 percent in the last two years (2010-2012). The BSE AUTO Index outperformed the benchmark Nifty by 79%, 12% and 19% in FY10, FY11 and FY12, respectively. However, the sector has shown a sluggish growth of 12 percent in 2012. The trend is likely to stay with a 10 percent growth outlined for 2013 citing high ownership costs (fuel costs, cost of registration, excise duty, road tax) and slow rural income growth. Solid but cautious growth is expected over the next few years. However, from a long-term perspective, rising incomes, improved affordability and untapped markets present promising opportunities for automobile manufactures in India. According to Macquaire equities research, sale of passenger vehicles is expected to double in the next four years and growth anticipated is higher than the 16 percent achieved in the past 10 years. Two-wheeler vehicle segment is expected to show slow growth of 10 percent CAGR over the period of 2012-2016, suggests the report. The Government recognizes the impact of the sector on the nation’s economy, and consequently, the Automotive Mission Plan 2016 launched by it seeks to grow the industry to a size of US $145bn by 2016 and make it contribute 10 percent to the nation’s GDP. The ICRA analysis of the Indian market projects heavy growth for competitively priced sports-utility-vehicles or SUVs and two wheelers. A number of major global brands like Honda, Suzuki, General Motors and Hyundai have launched their products in the SUV segment of the Indian automobile market. An average of 11. 5% growth in the two-wheelers sales in 2004-2007 has kept a number of global companies interested in this segment as well. The market has been moreover bolstered by a healthy rise in the sales of heavy commercial vehicles, and the presence of a strong auto component industry that now ranks 2nd in the world. One of the best things to happen for the Indian automobile market in the recent years was its telling improvement in the export sector. There was a 56% growth in exports from 2003 to 2004. Although economy cars continue to hold the lions share of the export market, vehicles worth more than USD 1 billion were also exported in 2004, for the first time in history. This increasing demand for Indian cars on the foreign shores has helped the countrys automobile industry in two significant ways. First, it has decidedly contributed to the economic growth of the industry. Secondly, it has helped to improve the image of the Indian manufacturing infrastructure at a global level. This increased confidence has resulted in more and more foreign brands opening manufacturing units in India, directly contributing to economy and employment. With a number of foreign brands joining ranks with the domestic manufacturers, the Indian consumer is now flooded with choice. An average Indian can now select from a wide range of Indian and foreign products. Some of the major Indian players are Maruti Udyog, Tata Motors, Mahindra, Ashok Leyland, Hero Honda and Bajaj. Toyota, GM Honda, Daimler Chrysler, Ford, Volvo and Hyundai Suzuki are the key international players in the Indian Automobile market. However, despite the presence of foreign brands, the domestic companies are still the biggest players. Maruti Udyog and Tata vehicles share the top honors for passenger and commercial vehicles respectively. The Indian automobile industry is now riding high on success, and the bright picture does tend to obscure the problems and challenges that lay on the track of its growth. Poor road conditions, heavy pollution and large scale traffic related accidents are serious impediments in the way of the industrys growth. However, steps are being initiated by the government to address these problems at various levels, and solutions are being worked out at a steady pace. Indian Automobile Industry SWOT Analysis Job opportunities in automobile sector The economy is booming and salaries are zooming. With an increase in purchasing power of people in our country, Indias automobile industry has become one of the fastest-growing in the world right now. With more disposable income and affordable cars like Nano hitting the road, car sales have touched new heights. To capitalise on this opportunity, many foreign companies are expanding their operations in India. It is for this reasons that there are plenty of job openings in automobile industry. For the right candidates, the salary is big. Jobs are available across almost all fields engineering, research and development, finance, human resources, and information technology. According to the Confederation of Indian Industry, auto sector currently employs 787, 7702 people, 58 percent of who are in the passenger car segment. However, there is an increasing demand for skilled professionals in the domain of effective service delivery, spares management and support functions. ITIs and Polytechnics provide 530,000 graduates every year, but there is an urgent need for updating courses to keep up with changing trends in technology, manufacturing, and processes. 2 most popular career options for MBA (at top level) in automobile industry-: Marketing Head: How is BMW different from Toyota? A marketing head is responsible for building the brand of the company. He has to position the companys brand, promote it at both domestic and international level, then see its performance in the market vis-a-vis other competitors. Qualifications: MBA with specialisation in Marketing and minimum work experience of 10 years. Expected Pay: Salaries range from Rs 800,000 rupees to Rs 5 million ($111,000). Some major multinational companies pay as much as 10 million rupees ($224,000). Financial Analyst: A financial analyst plays a key role in preparing the companys business plans, and is involved in the vehicles pricing and suggesting ways to reduce cost of production. He will also evaluate the progress of the product and reports its financial performance. He will also keep a check on the performance of competitors products. Qualifications: Companies typically look for candidates with a post-graduate degree in commerce, or masters in business administration with a major in finance. At least an experience of 15 years is required. Expected Pay: According to a report in Wall Street Journal, the salary of a financial analyst ranges from $67,000 to $156,000. Upcoming trends India is emerging as a strong automotive RD hub with foreign players like Hyundai, Suzuki, General Motors setting up base in India. This move is further enhanced by Government’s support towards setting up centres for development and innovation. Tata Nano’s successful entry in the Indian market has steamed up the opportunities of growth available in alternative segments like electric cars, vehicles run on natural gas, etc. Factors that will drive growth in the sector * Rising incomes among Indian population will lead to increased affordability, increasing domestic demand for vehicles, especially in the small car segment. * Fuel economy and demand for greater fuel efficiency is a major factor that affects consumer purchase decision that will bring leading companies across two-wheeler and four-wheeler segment to focus on delivering performance-oriented products. * Product innovation and market segmentation will channelize growth. Vehicles based on alternative fuels will be an area of interest for both consumers and auto makers. * Focus on establishing India as auto-manufacturing hub is reigning in policy support in form of Government’s technology modernisation fund. * Industry will seek to augment sales by tapping into rural markets, youth, women and luxury segments.

Textile Industry In The Era Of Globalisation

Textile Industry In The Era Of Globalisation According to the Findings the most pure, beneficial and the most powerful biggest industry in the world is Textile industry. In today world of business it is working as a back bone of the countries. An estimated figure of the industry market is $400 billion and there are more chances of growth in the coming years, according to the saying in 2001of the research analyst that textile industry will grow 25% in 2002 to 2010 and there figure was true and in 2010 the figure accumulates to $480 billion and in the coming few years it will further grow. Toady, every country is putting his hands in this business and trying to give his best. Britain was the first country who just gave a new life to the textile industry by making machinery for the textile industry and the slowly it spread over the whole market of the world. Global Economy By Global economy means economy of all the countries. Because, international economy is the name when the economy of all countries comes together. There are factors which makes international economy which are, trade, investment, economical alliance of the countries and migration. The economy of a country can be measured by his GDP. According to the economists monetary values f any country whether it is USA by itself all the economies could only be measured by preferably through dollar. Global economy could be affected by different factors which includes Currency Value, Trade Restriction, Political Situations, and labor cost, etc. J.P. Morgan (Global Data watch) There are countries who contributes in a huge /wide range to the global economy Countries contribution to the global economy: First thing through which all the countries of the world contribute to the global economy is Politics because though politics here are many things which came into existence in the form of contribution to the global economy. Secondly, trade is most appropriate and unique way of contribution in the global economy. There are so many other factors which contribute in a large amount to the global economy. According to the facts and figure including china and Japan, USA, France and Germany are the largest economies of the world because they gives an output which is not in comparison of others. Because they give best output in the very field, like food, labor, imports and exports which gave them a top level. There are other countries too which comes in the list of top ten countries of the world who contribute a large amount in global economy. This list includes brazil, Italy Canada and some other countries. However, beside this great contribution by all the countries global economy is still providing a figure of challenges in the form of unemployment whose rate is 30% around the world, enforcement to the labor footwork 41%, investment by public to the government plan less then 40%, and etc., All the countries are trying to just remove these factors affecting the global economy but they cant, china is heavily providing cheap labor but this does not remove the unemployment. (WTO by Dr.Sup achai) Another important factor which is heavily affecting the economy is terrorism. Terrorism is another part of the economies of the countries which is badly affecting it. Countries and there economies are also being affected with the increase in oil prices. There is factor of global health crisis, it is true that globally health is maintained by all the countries but to some extent thy lack and they have just left some loop holes which causes bad effect on the humans life i. e., spreading diseases in the form of HIV Aids, bird flu, swine flu. There are measures to deal with these things but those are not adopted. (business-and-economy/textile-industry) As the factor terrorism is creating so much problems for the global economy so to deal with it is very important for all the countries and to deal with this factor all the countries have to come together to find out some better results. Infect, not just for the terrorism all the countries have to come together to deal with all the problem because the problems like, terrorism, Health diseases, inflation, poverty, unemployment are not small problems they are worst threats for the economies of all the countries around the world. History of textile History of textile is roughly based on these things or countries which have given a boost to the textile sector in the whole world and these countries are: Islamic Persian Excerpt from  Woven from the soul, spun from the heart Excerpt from   master pieces of Persian art safavid Turkish Chinese Indian Italian Japanese Kashmiri Lets talk abut these simple but beautiful art of textiles styles which gave a wave to the textile industry both in design and culture. (Mary Belles) Islamic Textile History: Islamic textiles are as old as the Islam itself, Islamic textiles are the master piece of the textiles industry they gave a shape and a beautiful view of the clothing system. Islamic textiles were as demanded by the all countries as now e demand for the latest verities of the design. Islam is the symbol of peace and Islamic people were having a great quality of showing there culture I n the way of coloring their cloths. The essence of Islam in Europe is also the size of their language, their impact highlighted by the West was exported widely. For example, Geffen English word mohair and Taft » and  «Highlights », any manufacturer, Arabic, Farsi. Despite its nature, a relatively small fibers of the early Islamic era is alive. At any time, value Islamic fabrics were on stretchers, cut because they are inherently weak again, over fiber. Most of the early Islamic textiles, notably the maintenance of the store is dry and dark, including the grave, could be used in Egypt. Living piece of silk, cotton, linen and wool, often dyed in bright colors. These intricate designs and rich colors for use in a structured screens show textile technology. Silk Industry History: It is a great source of inspiration, often expect to find more songs from the miniature glossy silk fibers woven Peres today, inspired by the Merchant of Venice with a touch of world imports, often, sometimes bright, Culture in the vehicle owner with life. The project is based on animal and plant origin of the naturalist and created images based on royal Persian carpets of the Safari Empire and luxurious fabrics with sophisticated design language is polite and civilized. Persian rugs and remote villages, the lack of cooperation tissue and a variety of colorful geometric abstractions in the design is unlike kkwaewaneun. The experience begins long before the dynasty in the history of silk embroidered fabrics. At the time this work was exported to Europe and Rome. Prohibited the use of gold in the men because they stopped after the Sassanid period and type of tissue, almost. Mughal period, almost hiding fearing for his life he lived in Iran, the forgotten master of the textile sector. D uring the Safavid Shah was revived, the textile industry during the reign of apbaseuui was to textile artists from Isfahan switch the monarchy and the workshop are invited to start work. Turkish Textile History: Making fiber arts, especially in Anatolia, Konya Turkey, Bergama size barn and Seljuk, Feudal, during the Ottoman and the best fiber in the middle of a flourished jjanhaetdeon. Choose rugs and textiles, and fine examples of Turkish Islamic Art Museum (both in Istanbul) Kilim rugs Vakiflar museums and other museums in Turkey are different. Turkey has been developing more practice in the textile arts, weaving for centuries. The National Museum eloquent testimony to the example of the private collection of textiles and embroidery, painting, block printing, and provides an artistic medium. Ottoman era is to Bursa, Bilecik and ÃÅ"skà ¼dar, and the major cities of the world, such as silk, velvet, cotton and wool are now living, Sarayi clothes jjandoeeotda the Topkapi Museum, a collection of the Sultan is to focus on the case. Shares a wealth of material in court and the artists studio as a judicial decision based on running the design. (Mary Craft) Greater part of life and death, but all shares sold in Europe and some are intended for private use. Silk production in the late 16 Century stock market opened, but the performance, and that was not enough to satisfy the demand of the Ottoman repeated domestic world must rely on imported raw materials continued. Velvet Italian history: Weaver over most fanciful images of art: the kingdom, the altar, the royal bed chambers, bourgeois salons and ateliers of great couturiers, seems full of velvet. Giuseppe Verdis opera with only the most provocative characters such as velvet dress that Rossini and Donizetti. Giuditta Pasta, one of opera velvet play all the crazy waste of attention in costumes from Caruso to Galeffi So first, Courreges, Cardin, Rabanne, Marucelli and a long list of de Barentzen what was said about the designer? Italy, the entire 18th century until the twelfth century, the largest manufacturer in the Western world of velvet has been signed. These wall decor fabrics for clothes, and is expected to be for centuries, Lucca, Siena, Venice, Florence and Genoa in the offspring of a car interior, and all kinds of horse furniture collection, providing rest of Europe. Textile Industry and Revolution in Britain By having a look at the market and at global economy I found Textile industry at his best. According to the facts and figures textile industry has grown itself at a very high rate and today textile industry is contributing at a very high level to the global economy. With the invention of spinning mills and weaving machines in Britain the whole world witnessed remarkable growth because it has reduced labor cost as well as time consumption. Lets talk about the history of textile industry, there were some major steps to be taken which were, Harvesting and clean of wool by hands Card it and spin it to thread To wave the thread into cloth Finally fashion and sew the cloth And it was all done with the human labor which consumes cost and time so it was a lassie process. According to the history America in 1786 tried first to make yarn weaving machine to reduce time and cost effecting thing s they encouraged the engineers but because of some loop holes those machineries didnt worked correctly and they sold the machinery to Moses brown Britain engineer. It was the time of revolution for the Britain. During the eighteenth century Britain got the control over the textile industry figure shows that its exports were increase 25 % due to this revolution and then as the time passed they spread it all over the world with the latest technology of machinery for the textile industry. Decline of British Industry Even though Britain was the leader because revolution was came in the Britain for first time in Textile industry but Britain lost its status in the ERA of 2000, Britains started declining itself from 1950 because the mill owner and the workers union were not combined and doing work with effort. Secondly the competitors from Japan textiles industry gave them a big defeat. With the entry of Far East and India in cotton weaving they were in a big competitive situation. With the increase in the growth of these countries Britain started to blame the political situation of the country. (Susan Wolcott) Americas wrong way to defeat the Britain The USA personnel followed the British lead by using blue prints of the Britains which were stolen by their respective personnels and by the immigration of the engineers of the British to USA, by doing this thing slowly but steadily USA made a big giant of sewing , weaving and cotton spinning mills. They used all the measures to defeat the Britain and sooner they became the leader of the market. Asian Textile Industry America has enjoyed an ERA of being at the top of textile industry but then they got a situation of great rivals in the form Asian competetors. America tried hard to improve the material quality; although America was having an edge over the quality of machinery but due to cheap labor and low material cost Asian countries take the control from USA this thing gave him a big defeat, and because of the cancellation of MFA the developing countries got an edge over the success rate then USA. Although it was not a god idea but Asian countries were still getting the best out of it. Being the holder of market Asian countries got the best share rating, India was at 20 %,and china was representing a share of 45% according to the proceeding of 2010.other the these two countries Pakistan, Bangladesh and some other countries are also trying there best to gave quality production. Because, these countries are awarded of this fact that if they will produced quality production then they will get foreign investment and their economy will boost and there are so many chances to come at the top. There is round figure investment in china according to the stock market and global market analysis in 2010 there was a 100 bln investment in china in textile sector of foreign countries. There are some other factor which gives ways to become at the top, these includes, Growth Drivers Seasons cheer If we look at the customer his taste changes and this is the most important factor which china and other Asian countries have adopted, they are changing their designs and fashion with the change in time to remain at the top. There are mild signs are seen for the success of textile industry in Asian countries. (Mary Bellies) With some rough facts and figures this thing came into being that round about 45 % of the dyes were purchased by the Asian countries from the global market which accumulates to an amount of 16 million USD and this is just the figure off Asian country means Asian countries textile contribution in international market as well as in their local market is a t a very high level. Methodology This research has been conducted qualitatively. We have looked and gathered data from many different resources which include, Books, Websites, Articles Published In journals. First of all we have just looked at the global economy about the contribution of the different countries I to the international/global economy, then we looked into the local economies of the countries and gathered data to analyze the differences of the countries contribution to the global economy. We have also looked for the challenges difficulties that countries are facing during their success. Through this research we have been clarified that at the start Britain were the leader but then Asian countries got a boost and captured the textile industry. Results and Findings Chinas Textile Industry: IF we talk about china it is having a long history, the textile industry of china is a conventional cutthroat industry, industry of china at this time is playing a main role in development of national economy. More on textiles are also the main exports of china. According to the figures of 2009 with the provocation of the economic situation, Chinese government issued an array of industrial supporting policies including increase in the export rate. The figures also show that china was having a sustained growth in 2005. But, there growth started to boost up in 2007. And in 2009 Chinese realized that there sales revenue has grown from 2.01 to 10.32%. This was a great rise for the Chinese although according to them their rat has gone down but still they are having better results. Although china was at a success but he was having a threat. His biggest threat was his rival countries which include Bangladesh, India, Pakistan and Indonesia; All these countries were also enjoying the same level position as china. And juts like china Pakistan, India and Bangladesh also having cheap labor and raw material of best quality.. Indian Textile Industry India is at the second spot in the field of textile and he is also enjoying the benefits just like china and other countries. Indias textile industry plays a role in the stabilization of his economy. The contribution of India in his economy from just textile sector is 35 %, It accumulates to the at least one third of the total contribution from all other sector which means Indias textile sector splaying a role of backbone of his country. History shows that by the end of 19th century, domestic wool production of India was having a transformation that was largely attributable to imposing rule. Indias textile industry is mostly based on small scale , spinning, weaving, finishing and apparel making enterprises. Research shows that India accounts to 22% of world spiritless capacity. Its spinning sector consists of 1,161 small scale independent firms and 1,566 larger scale. (Susan Wolcott) India has grown it sector on textile by giving it more preference rather then other sectors because he knows the situation of the market , Indian government also support the textiles industry that it should grow as much as it can. India is not just having a share in just local markets market but India is having a name in the international market. India has gain more then any other country it also some value when its currency gain some appreciation in international market. Indian government took many steps to boost the textiles economy, government started many different projects at small level and at big level. There is no doubt that Indian textile industries future is bright and there are many chances of India to becoming at that number one spot. India is having a vast number of players, named: Arvind mills limited Raymond lTd Alok Industries Aditya Birla nuvo LTD. Century Textiles. Welspun India Himatsighka seide lTd Bombay Dieng. Opportunities and challenges for Indian textile Factor Conditions à ¢Ã¢â€š ¬Ã‚ ¢ Abundant Availability of raw materials à ¢Ã¢â€š ¬Ã‚ ¢ Low Cost à ¢Ã¢â€š ¬Ã‚ ¢ Flexibility à ¢Ã¢â€š ¬Ã‚ ¢ Skilled Labor à ¢Ã¢â€š ¬Ã‚ ¢ Ability to produce customized Apparel à ¢Ã¢â€š ¬Ã‚ ¢ Lower Lead Tim Firm Strategy, Structure and Rivalry Dominated by unorganized sector à ¢Ã¢â€š ¬Ã‚ ¢ Highly competitive and fragmented à ¢Ã¢â€š ¬Ã‚ ¢ Entry of foreign players Govt. Regulations/ Policy Support for Technology up gradation à ¢Ã¢â€š ¬Ã‚ ¢ Government reimburses 5% of the interest rates à ¢Ã¢â€š ¬Ã‚ ¢ A credit linked capital subsidy of 10%, In addition to the existing 5% interest Reimbursement for modernizing the processing sector à ¢Ã¢â€š ¬Ã‚ ¢ Quality Improvement Related Supporting Industries Product Development/ Design à ¢Ã¢â€š ¬Ã‚ ¢ Cheap and abundant raw material à ¢Ã¢â€š ¬Ã‚ ¢ Well developed Textile machinery Industry à ¢Ã¢â€š ¬Ã‚ ¢ Well Developed IT capabilities Demand Conditions Large Domestic Potential à ¢Ã¢â€š ¬Ã‚ ¢ Favorable Demographics à ¢Ã¢â€š ¬Ã‚ ¢ Growing Income and Purchasing power à ¢Ã¢â€š ¬Ã‚ ¢ Growth of organized retailing, malls Textile industry in Pakistan: Pakistans exports of apparel sector occupy a central position. Asia is the eighth largest exporter of Pakistani textile products. The total GDP contribution of neunyi sector is 8.5%. It provides employment for approximately 1,500 ten thousand people, about 49 million U.S. dollars from 30% of the workforce of the country. 18 trillion world trade volume of textiles, which is the annual U.S. total of 2.5% . Among them, Pakistans share is less than 1 percent. Development of the manufacturing sector has been given the highest priority A major stress on agro-based industries in Pakistan and since its establishment. The worlds leading producers of cotton was one of the Pakistan examples; take advantage of abundant resources in the field of cotton textile industry in the direction of the development was the priority of industrialization. Currently, 1221 ginning units, 442 spinning units, spinning units are 124 425 small units of production of textile products. Highly organized industry is a large piece of cottage / small scale sector is composed. Some of the value chain of textiles and other sectors are: spinning, weaving and fabric dying industry and the most in-house finishing facilities and organization operates. The fabric is made up of small entities. Other units such as the media, while the small size of the unit, dyeing and printing and finishing sub-sectors and the field portion of the field, in order to handle a large amount of offers. Textile bleaching and dyeing cloth, printing sector followed by the proce ssing industry overall, as every second. Clothing manufacturers in the textile value chain to generate the highest employment. More than 75% of the unit is a unit of small size. Knitwear industry, mainly (Knitting + processing + maker) as an integrated unit is comprised of operating facilities. Woven garments and knits two areas mainly in Karachi, Lahore and Faisalabad are clustered enough to be working ladies. Pakistans textile industry is one of the famous textile businesses but due to uncertain situation it is lacking with the factor of success. There are so many reasons why it is not coming up. These reason are, Light problem, Governments wrong policies and so many other factors which affects the Pakistan textiles economy. If we look at the figures of the investments Pakistan has invested 23.1 million on the imports of machinery in the month of February last year. If we compare this thing or import with the India and other Asian countries Pakistan has increased it self 190%. Due to this thing new investment has started coming in Pakistan . Pakistan is having lot of potential to be the market leader. Pakistan is having cheap labor, raw material better machinery and that entire skilled person which are necessary to run a textile business in a country. Germanys Textile Industry When we come to talk of style in clothing Germany is on the number position, Germany is having a history of manufacturing great design in clothing . History shows Germany is manufacturing, innovative clothing and his flexibility in design making has made him one of the top country in textile industry. Today, when we talk abut the production of textile including, clothing, home textiles and technical textile. Government divide in into 3 percentages from which 30% goes to clothing, 30% to home textiles and 40% to the technical textiles. If w take this output and measure all the countries Germany is at the top like the government of all other countries the government of Germany is also considering it one of most important part of the country economic contribution factor. (German Business portal) Textile industry in Germany in numbers: 2008, turnover recorded up to EUR 20 Billion Clothing up to 42%, textiles 58% which comes to the total turnover of 2008. Technical textiles alone accumulates to the 45 % There export quota has reached to 42.7% Imports of textiles reached to EUR 30 Being the second main importer of the textiles in the world Germany has faced an increase in the demand of his material in the pats few years. Being the most power textiles supplier in the world Germany is also acing some of the main problems which all the other countries are facing. Germany has categorized its textiles into five categories naming as, Enshede Textile Remanats Rix and co immerath Trevira Webbgpinnerei 1 Webbgpinnerei 3 Supporting Institutions (Many foreign organizations want to establish themselves successfully in the German market, manufacture and support. The most important associations of the textile industry are: à ¢Ã¢â€š ¬Ã‚ ¢ organization of the German textile and fashion industry à ¢Ã¢â€š ¬Ã‚ ¢ Textination à ¢Ã¢â€š ¬Ã‚ ¢ German Institute of Textile Retailers à ¢Ã¢â€š ¬Ã‚ ¢ German Federation of Purchasing and marketing group, 1. The organization of the German textile and fashion industry In each country, a leading fashion department, which he talks directly to fmn, how it related to fashion clothes if you want to export earnings which is the main point of the German Textile and Fashion. 2. Textination that Germany is the official website of the entire textile industry. The main objective of the German textile and clothing industry and retail market to provide comprehensive information about the role that is perpendicular to the platform.   Ã‚  Ã‚  Ã‚  Ã‚  3. German Textile Research Institute of Market Dealers (BTE):   To provide contact information, textile retail sector and an extensive database. The site also on the fabric of the country to cover 85% of the retail demand contains useful information on companies in Germany online guide for retail trade textile trade offers. This guide for wholesalers and professional organizations can be found more useful data. 4. Buy (ZGV) and Group Marketing Federation of German   mid umbrella organization of trade in services and technology transactions and the arts in Germany. 220 000 purchase and cooperatives representing 320 member companies ZGV. Bangladesh Textile Industry Bangladesh is also growing day by day, It has introduced it self as the master planner of the textile industry. If we look at the history and the current situation of the Bangladesh textile industry has become the back bone of the Bangladesh. If we look at the history of Bangladesh, after its foundation tea and jute were the most export oriented sectors. But, a rival named as flood was a big enemy of the Bangladesh which decreased the jute production in Bangladesh. This industry was employing 3 million workers whose 90% strength was based on womens. Bangladesh was in a situation of poverty he was not able to understand what he has done and what he has to do in this current situation at that textile was new in the field they came with the idea of employing those worker in to the textile sector. After adoption of this thing Bangladesh got a growth and make his position in the market. From 1995 to 2005 Bangladesh was in a situation of agreement of textile businesses with the other countries. In the period of 2003 Bangladesh imported a machinery for the sector of textile worth 31 million. And after having success in 2007 41 million euros of latest machinery. Germany exports to the countries have been reduced after the entry of Bangladesh now to the like china, Pakistan and India Bangladesh export rather then Germany. By having a closer look at the textile sector of Bangladesh Bangladeshi government stated to help and started making investment in this sector. A Huge amount was invested by government in this sector for the purchase of machinery. There is huge list of companies working in Bangladesh: Shan Kniting and processing LTd. Mechano Labiba Trading Sikder buyimng Ltd Topstyle Alif Pvt ltd Vertex and dà ©cor Mona yam sweater complex And many other companies. They are playing a big role in the growth of economy of Bangladesh. Conclusion The above mentioned discussion on the textile industry relating to the different countries of the world we came with the result that all the countries whether they are at the top or at the low level all are struggling to gave his best out of what he got. All the countries are facing some major problems like, According to the facts and figure including china and Japan, USA, France and Germany are the largest economies of the world because they gives an output which is not in comparison of others. Because they give best output in the very field, like food, labor, imports and exports which gave them a top level. There are other countries too which comes in the list of top ten countries of the world who contribute a large amount in global economy. This list includes brazil, Italy Canada and some other countries. However, beside this great contribution by all the countries global economy is still providing a figure of challenges in the form of unemployment whose rate is 30% around the world, enforcement to the labor footwork 41%, investment by public to the government plan less then 40%, and etc., All the countries are trying to just remove these factors affecting the global economy but they cant, china is heavily providing cheap labor but this does not remove the unemployment. Another important factor which is heavily affecting the economy is terrorism. Terrorism is another part of the economies of the countries which is badly affecting it. Countries and there economies are also being affected with the increase in oil prices. There is factor of global health crisis, it is true that globally health is maintained by all the countries but to some extent thy lack and they have just left some loop holes which causes bad effect on the humans life i. e., spreading diseases in the form of HIV Aids, bird flu, swine flu. There are measures to deal with these things but those are not adopted. As the factor terrorism is creating so much problems for the global economy so to deal with it is very important for all the countries and to deal with this factor all the countries have to come together to find out some better results. Infect, not just for the terrorism all the countries have to come together to deal with all the problem because the problems like, terrorism, He alth diseases, inflation, poverty, unemployment are not small problems they are worst threats for the economies of all the countries around the world. But, with all these problems all the countries are still having great turnover, great quality of production. They are giving great competition to their rival industry , almost all Asian country who indulged themselves ij this sector are having a lot of trouble but at the same time they are enjoying good things.